|
|
 |
Key Features: | |
| · "Plug-and-Play" linear actuator | ||
| · Small profile | ||
| · Cable management system | ||
| · User panel and air connectors | ||
| · "Easy" mounts | ||
| · Limit sensors | ||
| · Multiple forcers on single platen | ||
| · Compatible with stepping motor drives | ||
| · IntelLiCoder Linear Feedback |
PARAMETER |
||||||||
| SYSTEM | ||||||||
| Force | lb | 5 to 50 | ||||||
| Repeatability open loop | note 1 | in | 0.0002 | |||||
|
IntelLiCoder |
count | 1 | ||||||
| Resolution open loop | notes 2, 3 | in | 0.00004 | |||||
|
IntelLiCoder |
note 4 | in | 0.00004 to 0.01 | |||||
| Operating speed | in / sec | 60 | ||||||
| Number of phases | 2 | |||||||
| Cyclic error | in | 0.001 | ||||||
corrected |
note 5 | in | 0.0004 | |||||
|
Accuracy open loop |
in | 0.0004/ft +- 0.001 |
||||||
|
IntelLiCoder |
in | 0.0004/ft +- 0.0004 | ||||||
| Motion straightness | in /ft | 0.0004 | ||||||
| Current per coil | amp | 1.5 | ||||||
| Max case temperature | deg F | 140 | ||||||
| Bearing type | top | note 6 | ball/air | |||||
| side | note 7 |
ball/air | ||||||
| Air gap | in | fixed |
||||||
| Forcer finish | anodized | |||||||
| Standard length | note 8 | in | 12, 24, 36, 48, 60 | |||||
| Platen pitch | note 9 | in | 0.040 | |||||
| Note 1 | Open loop, unidirectional | Note 6 | Built-in ball bearings rollers and air bearing versiona available |
| Note 2 | Motor resolution 0.010 in per full step | Note 7 | Magnetically preloaded side bearings |
| Note 3 | Dependent on microstepping resolution | Note 8 | Consult the factory for other travel requirements |
| Note 4 | Dependent on the IntelLiCoder resolution | Note 9 | Consult the factory for other pitch requirements |
| Note 5 | With cyclic error correction | ||
Specifications and drawings subject to change without notice |