Linear Actuator LSSE-110

Linear Actuator LSSE-110
Click to enlarge

- Turn-key solution linear motor actuator

- Modular design

- High speed and acceleration

- Zero backlash

- Integrated cable track

- Low profile

 

 

The Direct Drive Linear ServoSlide system is a direct drive actuator that eliminates wear, friction, backlash and compliances associated with mechanical transmissions, such as ball/lead screws, rack & pinion, belts/pulses and gearboxes

 

Linear Motor Forcer features non-contact design and low cogging for fast and accurate positioning

 

Carriage support double rod bearing system is integrated into the slide to support moving carriage and to provide dynamic stiffness and precise straightness of travel.  Bearing rollers are magnetically preloaded by the carriage against magnet track

 

Integral Linear Encoder provides precision non-contact linear position feedback with resolution 1 microns 

 

Limit and Home sensors establish end of travel and "home" positions

  

Cable Transport Module with high flex robotic cable is installed and pre-wired to the amplifier

  

Mounting of the actuator can up-side down and vertically with optional linear brake

 

Multi-axes Gantry and XYZ arms can be easily constructed using Linear Servo Slides

Parameter

Unit

LSSE 110-50

 

 

 

 

Peak force (note1)

Fp

N

325

Continuous force (note 2)

Fc

N

115

Peak current

Ia

Amp

6

Continuous current

Ic

Amp

2

Max speed at Fp (note 3)

Vp

m/sec

2.6

Max speed at Fc (note 3)

Vp

m/sec

4.5

Acceleration

G

 

5

Cogging force

Fc

N

1.5

Accuracy (note 4)

 

µm

25 - 50

Resolution (note 5)

 

µm

1 - 10

Repeatability

 

µm

2

Max payload weight

Mp

Kg

20

Travel stroke (note 6)

S

mm

n * 96 (n = 1…30)

Stage length

L

mm

S + 192

Carriage weight

Mc

Kg

1.8

Linear track weight (note 7)

Ml

Kg

2 * n (n = 1…30)

  

Note 1   Duration 1 sec

Note 2   Coil at 120°C, air cooling

Note 3   Motor bus voltage 310 VDC (Line voltage 220 VAC)

             Higher speed winding is available upon request

Note 4   Installation dependent

Note 5   Encoder grating pitch 1 mm

             Resolution programmable in the amplifier

 Note 6  Max  2.5 m (consult factory for longer  stroke)

 

There are no ordering details for this product.